| Customization: | Available |
|---|---|
| After-sales Service: | Life Time |
| Warranty: | 12 Months Free |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASTM-D2210, TAPPI-T403, JIS-P8112, L1018, and L1004 standards, ISO 2758, ISO 2759
This tester is a specialized equipment used to determine the bursting strength of various kinds of materials under relevant international and industry standard, it can test paper, fabrics and textiles and so on.
Touch screen operation, real time dynamic curve display
No film burst even under zero load, no oil leak, much time saving, lower cost
Calibrated by imported calibration tool, equipped with calibration module, free calibration at any time
Single piece sample min grab peak 1.5kg
| Measure range | 200kpa ~ 5600kpa, ≤±0.5% |
| Pressure resolution | 0.1kpa |
| Deformation measure deviation | ≤1mm |
| Concentricity of top/bottom plate | ≤0.25mm |
| Pressure of Film Convex Disk | (9±0.2)mm /(30±5)kpa |
| Oil feeding rate | 95±5ml/min |
| Plate dia. | Top:31.5±0.5mm, bottom: 31.5±0.5mm |
| Deformation monitor | Three-dimensional Semicircular full-view observation window |
| Clamping positioning | 360° free orientation positioning test probe |
| Probe control | Intelligent control pressure relief system |
| Driving mechanism | All-steel chain drive to prevent detection deviation caused by compression deviation |
| Power source | Full-sealed solid power source |
| HMI | Touch screen, real time display of test data |
| Clamping force | >690kpa (adjustable) |
| Units | Kg/cm2,kpa,lbf/in2 |
| Printer set | Modular all-in-one thermal printer |
| Working condition | Temp.(20±10)ºC,RH<85% |
| Overall size | 400*400*500mm |
| Net weight | 45kg |
| Air source | Prepared by customer |
Standard configuration
1 host;
4 rolls of printing paper;
silicone oil 1 bottle;
high-pressure rubber films 2pcs;
5 imported Japanese high-pressure calibration films;
1 specialized wrench
Special Consumables for Paper and Cardboard Burst Tester
1. Rubber film, It can be used with the burst tester to accurately test the burst value of the sample.
2. Special calibration sheet (aluminum foil sheet)
Place of Origin: Japan; Specification: 5cm*5cm
Standard value: high pressure 1165kpa; low pressure: 953kpa
1kpa=0.145LbS/in2=0.0102kgf/cm2
1kgf/cm2=98kpa=14.2LbS/in2
3. Silicone oil
Used in oil cup; Specification: 250mL/bottle
Calibration aluminum foils
Packaging test machines
){kind=link}