| Customization: | Available |
|---|---|
| After-sales Service: | Life Time |
| Warranty: | 12 Months Free |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
BZ-WVTR-201
ISO 15106-2, ASTM F1249, GB/T 26253-2010, TAPPI T557, JIS K7129, YBB00092003-2015
This water vapor transmittance testeris applicable to the measurement of water vapor transmittance of plastic film, composite film, sheet materials, building materials and other high barrier materials. Based on the principle of infrared method, features high efficiency and wide test range.
High precision infrared moisture sensor improves the accuracy and stability of the test
• High definition LCD touch screen, more intuitive content and easier operation
• Four test chambers are completely independent, and four identical or different samples can be tested at the same time
• A test chamber is used as the reference chamber to determine whether the test standard membrane data is accurate
• Three test chambers are used to test samples to ensure that three parallel samples can be tested at a time
• Wide range, high-precision, automatic temperature and humidity control to meet the test under various test conditions
• Unique test structure, four chambers are tested at the same temperature and humidity to ensure the consistency of test conditions of different test chambers
• Test results support multi format storage and data output, including experimental report Excel and cloud sharing
• The product complies with the GMP user's multi-level permissions
• Single and group statistical analysis of test results can be conducted
• It has ISP online control and upgrade functions, and can change the test function remotely as required
• Special computer communication software, which can perform real-time display of test, data analysis and processing, and data storage
The test principle of infrared sensor method is adopted. The sample to be tested is clamped between the dry and wet chambers with constant temperature. There is a certain humidity difference on both sides of the sample. Due to the existence of humidity gradient, the water vapor will diffuse from the high humidity chamber to the low humidity chamber. In the low humidity chamber, the water vapor is carried to the infrared sensor by the carrier gas. When it enters the sensor, it will generate an electrical signal of the same proportion. Through the analysis and calculation of the electrical signal of the sensor, Thus, the water vapor transmission rate and moisture permeability coefficient of the sample can be obtained.
| Film | Plastic film, plastic composite film, paper plastic composite film, geotechnical film, coextrusion film, aluminized film, aluminum foil, aluminum foil composite film, waterproof breathable film and other film materials | |
| Sheet | Engineering plastics, rubber, building materials (waterproof materials for building), thermal insulation materials, such as PP sheet, PVC sheet, PVDC sheet, nylon sheet, etc | |
| Paper and cardboard | Paper and paperboard |
| Model | BZ-WVTR-201 | BZ-WVTR-203 |
| Test scope | 0.01~50 g/m2 · 24h (normal sample) | |
| 0.00005 ~ 0.25 g/(pkg·24h)( Packaging components) | ||
| Test accuracy | 0.0001 g/m2·24h | |
| Number of samples | 1 | 3 |
| Test temperature | 10~60 ° C (normal) | |
| control accuracy | ±0.1°C | |
| Test humidity | 0%RH,35%RH ~ 90%RH,100%RH | |
| Humidity control accuracy | ±1%RH | |
| Test area | 50 cm2 | |
| Sample thickness | ≤ 3 mm (other thickness requirements can be customized) | |
| Test pressure | ≥0.20 MPa | |
| Interface size | 1/8 inch metal pipe | |
| Overall dimensions | 400 mm (L) × 600 mm (W) × 350 mm (H) | 600 mm (L) × 700 mm (W) × 450 mm (H) |
| Power Supply | AC 220V 50Hz | |
| Net weight | 30 kg | 60kg |
Configurations
Standard configuration: host, professional software, communication cable, sampler, gloves, micro printer
Optional parts: standard membrane and air compressor
Remarks: The air inlet of this machine is 1/8 inch metal pipe; Gas source and distilled water provided by users
){kind=link}