| After-sales Service: | Life Time |
|---|---|
| Warranty: | 12 Months Free |
| Delivery Time: | 7-10 Days |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
This machine is suitable for mixing ordinary concrete, light concrete and dry hard concrete. It can also be used in other industry laboratories to mix different materials. This machine is easy to operate, high mixing efficiency, small residual volume, and easy to clean. It is an ideal concrete mixing equipment for laboratory use.
| Structural type | Double horizontal shaft | |
| Maximum mixing capacity | 30-80 liters | |
| Power supply | 380vac, 50hz | |
| Stirring motor power | 3.0kw | |
| Mixing time | Adjustable | |
| Power of tilting and unloading motor | 0.75kw | |
| Mixer speed | 55 rpm | |
| Maximum turning angle of the drum | 110 degrees | |
| Mixing drum material | 16Mn steel | |
| Mixing blade material | 16Mn steel | |
| Clearance between blade and cylinder wall | 1mm | |
| Thickness of cylinder wall | 10mm | |
| Thickness of blade | 12mm | |
| Drum size | 700mm×600mm×500mm | |
| Machine dimensions | L1200mm×W950mm×H1100mm | |
| Net weight | About 700Kg | |
Construction
This machine is composed of a frame, a stirring device, a transmission system, a limit device and an electrical control system. The frame is the supporting part of the entire equipment, welded by channel steel. The mixing device is composed of a mixing drum, a mixing shaft, and a mixing blade. The mixing blade is fixed on the mixing arm and is integrated with the mixing shaft to form two sets of spirals. The direction is opposite, but the spiral ribbon mixing blade with the same lead and helix angle, the gap between the mixing blade and the inner arm of the mixing drum can be slightly adjusted. The transmission mechanism is composed of a reducer and a coupling. The cylinder limit device is composed of a locking pin and a positioning hole. The electrical control system has the functions of starting, inching, stopping and timing.
Working principle
The geared motor rotates the mixing shaft in one direction through the coupling. The positive and negative two sets of shovel blades on the mixing shaft agitate the materials. Due to the function of the helix angle, the shovel blades push the materials in the drum from one side to the other when the shovel works. On the other side, the cyclic action of pushing back to the original place from the other side makes the material fully agitated, so as to obtain a more ideal mixing effect. When unloading, the machine must be stopped, the lock lock is opened, the cylinder is rotated to a certain angle, and then the position is limited, and the jog button is pressed to realize the discharge of the mixture out of the cylinder.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}