| Customization: | Available |
|---|---|
| After-sales Service: | Life Time |
| Warranty: | 12 Months Free |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This machine can be used for creep, stress relaxation, tensile, compression, bending, shear, peel, tear and other tests of non-metallic materials.
Technical specifications
| Test load | Measure range | 10KN, 0.4%-100%FS | |
| Resolution | 1/300000 | ||
| Display error | ±0.5% | ||
| Test speed | Controlled constant test load rate & Controlled deformation rate | 0.01%~5%F.S/S, ±0.5% | |
| Constant test load & constant deformation control range | 0.01%~5%F.S/S, ±0.5% | ||
| Speed range | 0.05-500mm/min | ||
| Speed accuracy | ±0.5% | ||
| Displacement | Measure range | 0~999mm | |
| Resolution | 0.001mm | ||
| Indication accuracy | ±0.5% | ||
| Deformation | Accuracy | ±0.5% | |
| Medium deformation measure range | 860mm | ||
| Large deformation accuracy | ±0.5% | ||
| Large deformation measure range | 25-1000mm | ||
| Test width | 420mm | ||
| Moving beam travel | 1160mm | ||
| Clamping range | Plate | 0-8mm | |
| Rod | φ6-φ16mm | ||
| Compression test | Compression plate | φ70mm | |
| Bending test |
Supporting roller dia. | R2.5 R5.0mm |
|
| Press roller dia. | φ5mm | ||
| Support width | 120mm | ||
| Power supply | AC 220V,50HZ, 0.4KW | ||
| Net weight | 280KG | ||
| High & Low temperature test | Effective travel of grippers | 100mm | |
| Horizontal beam travel | 100mm | ||
| High Temp. oven | Can be removed | ||
| Work hearth size | 300*200*500mm | ||
| Temp. range | -40ºC~150ºC, ±0.5ºC | ||
| Temp. uniformity | ±2ºC | ||
| Internal cabinet material | SUS3042B stainless steel sheet | ||
| Enclosure material | Cold-rolled steel sheet with electro-plating | ||
| Heater | 316L Finned heating tube | ||
| Insulation material | Ultrafine glass insulation cotton, thickness 100mm | ||
| Air circulation system | Motor | 1/2 Hp | |
| Fan | Centrifuge type Stainless steel multi-wing | ||
| Circulation mode | Single | ||
| Cooling system | Compressor | Tecumseh fully sealed | |
| Cooling medium | Environmentally friendly refrigerant | ||
| Condenser | Air-cooled fin or sleeve condenser | ||
| Evaporator | Fin type multi-section type | ||
| Solenoid valve | Italy Castel | ||
| Others | Dry filter | ||
| Controller | ±0.1ºC; resolution: ±0.1ºC | ||
| Sensor | Pt100 | ||
| Control mode | Cooling and heating balance adjustment method | ||
| High low temperature oven Safety device | Over-temperature alarm protector Quick fuse Compressor over-heat protector Compressor over-current protector Wire fuse and full-shielded terminal |
||
- SERVE REAL INSTRUMENTS INTRODUCTION
){kind=link}