| Customization: | Available |
|---|---|
| After-sales Service: | Life Time |
| Warranty: | 24 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The cone calorimeter is a material combustion performance testing instrument based on the principle of oxygen consumption. After more than 30 years of continuous improvement and perfection, the cone calorimeter has become one of the most important experimental instruments for studying material combustion performance.
Cone calorimeter testing is a safe, fast, and accurate detection method. In addition to product development, cone calorimeters can also be used as quality control tools.
IMO International Maritime Organization: IMO MSC 40 (64)
• BS British Standards Institute: BS 476-15:1993
• NFPA American Fire Protection Association: NFPA 264
• NFPA American Fire Protection Association: NFPA 271
• ASTM American Society for Testing and Materials: ASTM E1474
• ASTM American Society for Testing and Materials: ASTM F1550
• ASTM American Society for Testing and Materials: ASTM E1740
• ASTM American Society for Testing and Materials: ASTM E1354
• ASTM American Society for Testing and Materials: ASTM D6113
• EN European Standard: CSN EN 45545-2+A1:2015
• EN European Standard: CSN EN 13501-1+A1:2009
ISO International Organization for Standardization: ISO 5660:2015
GB China National Standard: GB/T 16172:2007
GB China National Standard: GB 8624:201
1. The conical calorimeter adopts a sub cabinet design method, and the analysis cabinet is movable. It can be used for testing conical calorimeters and can also be connected to large-scale heat release rate testing systems such as individual combustion testing devices, solid room fire and cable combustion classification detection, in accordance with testing standards such as ISO 5660, ASTM E1354, GB/T16172, etc;
2. Integrated testing body and 19 inch analysis cabinet, embedded with PC type 15 inch industrial touch screen computer, used for the entire control and testing process;
3. The rated power of the conical heater is 5000W, with a thermal output of 0-100kW/m2. It is controlled by a PID temperature controller, and the radiation cone can be placed horizontally or vertically;
4. The sample box can accommodate samples up to 100mm x 100mm x 50mm in size;
5. Sample weighing range: 0-2000g; Accuracy: 0.1g (different ranges and accuracies can also be provided according to customer requirements);
6. The ignition system is a high-voltage spark generator of no less than 10KV, which adopts a rotating cylinder for automatic positioning;
7. Paramagnetic oxygen analyzer, range 0-25%, response time: 4 seconds, linear deviation: ≤ 0.5% FS, repeatability: ≤ 50 ppm O2, sensitivity drift: ≤ 0.1 vol.% O2/week or ≤ 1% measured value/week (non cumulative), whichever is smaller, detection limit: ≤ 50 ppm O2;
8. Non dispersive infrared CO and CO2 analyzer CO: 0-1%; CO2: 0-10%, measurement principle: infrared absorption, response time: 2.5 seconds, linear deviation: ≤ 1% FS, repeatability: ≤ 0.5% FS, zero drift: ≤ 1% FS/week, detection limit: ≤ 0.5% FS;
9. Smoke density analysis uses a laser system to measure smoke density, which consists of a photodiode, helium neon laser, main detector, and auxiliary detector;
10. The exhaust system consists of fans, smoke hoods, exhaust pipes, and orifice flow meters. The flow rate of the smoke exhaust fan is adjustable from 0 to 50g/s, with an accuracy of 0.1g/s;
11. The circular sampler is installed in the intake duct 685 mm away from the smoke hood, and there should be 12 small holes on the sampler to homogenize the airflow components;
12. The temperature of the airflow is measured by a sealed thermocouple with a diameter of 1.6 mm, which should be installed 100 mm above the flow measuring orifice plate;
13. Integrated gas pretreatment system, including sampling pump, filter, condenser, peristaltic pump, and moisture filter;
14. Temperature of condenser: 0-5 degrees, diaphragm pump, flow rate: 3 l/min, pressure: 2.5 bar;
15. Humidity alarm unit, which can automatically alarm when the moisture in the sample gas is too high, and can communicate through testing software;
16. Flow alarm unit, when smoke and dust in the sample gas are blocked, it can automatically alarm and prompt to replace the filtering device;
17. Select an SB type heat flux meter with a design range of 0~100k W/m, an accuracy of ± 3%, and a repeatability of ± 0.5%, accompanied by a calibration report;
18. Equipped with a portable water cooling system, when using a heat flow meter, users do not need to connect to external water sources or be equipped with water pipes;
19. In order to calibrate the response of the entire testing system, methane calibration burner calibration was used to measure the C-coefficient value;
20. The data acquisition system can automatically record the output of instruments such as gas analyzers, orifice plate flow rates, thermocouples, etc;
21. Equipped with a software operating system, the test results include: heat release rate, flue gas flow rate, C-coefficient, sample ignition and extinguishing time, total oxygen consumption, total smoke generation, mass loss rate, total heat release, effective combustion heat, carbon dioxide generation, and carbon monoxide generation.
Size and weight
Size: 2250 * 1000 * 2230MM
Weight: 538 kg
Power requirement: 220 V, 50 Amps
Environmental temperature: 10 ° C to 35 ° C
Working gas: compressor gas
| Size | 2250 * 1000 * 2230MM |
| Weight | 538 kg |
| Electrical Requirements | 220V, 50 Amps |
| Environmental Temperature | 10 ° C to 35 ° C |
| Working Gas | compressor gas |
Who we are
We are professional manufacturer & supplier specialized in Civil Engineering & Material testing equipments since 2003. We can supply various kinds of testing equipments that complies to the following standards ASTM/AASHTO, ISO, EN, DIN JIS, as well as other specialized industry standards. Meanwhile we are authorized oversea market distributer of some famous China testing equipments manufacturer. Our customers come from 6 Continents with more than 90 countries & area since company has been established.
Our advantages
1. Quality assurance--We aim to long term cooperation with every of our customer
2. Reasonable price -- we believe only reasonable price can guarantee reliable quality & service
3. Wide range products--we not only sale own products but also acting products of mulity famous China manufacturers, time saving, easier process, better quality & price, guaranteed service.
4. After-sales service guaranteed--all sold products enjoy 12 months warranty period since products claimed, free spare parts (the transportation cost payment depends on the weight & destination).
5. Fast response & professionalism-- 7/24 response either on sales inquiry or after-sales service, Monday to Friday response within 2 hours, weekend response within 6hours.
6. Multi payment modes--Wire transfer (T/T), Paypal (credit card), Western Union, L/C.
- Flammability Testing Chambers 
-SERVE REAL INSTRUMENTS INTRODUCTION
){kind=link}