GS-4PRO Gel strength Tester
Standards
"Chinese Pharmacopoeia" 2020 edition.
Comply with the current Chinese GMP regulations.
Standard "Food Additive Gelatin" GB6783-2013.
Standard "Medicinal Gelatin Hard Capsule" GB13731.
Light Industry Standard "Edible Gelatin" QB/T4087-2010
Introduction
It is a high-precision and professional gelatin gel strength measuring instrument. Imported motion modules and German high-precision displacement sensors ensure its strong comprehensive performance. This instrument can provide users with reliable and verifiable measurement results.
Main Features
7-inch high-definition touch screen, interactive interface, intelligent control.
Dynamic mechanical architecture: motion module + German high-precision displacement sensor.
Emergency braking + upper and lower limit control + force sensor element overload protection.
System authority management: three levels, multiple users. (user name + password login)
Measurement data storage: with USB mass storage function: all measurement processes and results can be recorded. Support historical data audit query.
Print content items: serial number, sample name, identification, batch number, measurement method, measurement result, inspector, supervisor, measurement date and time...
Real-time display: the measurement characteristic curve of freezing intensity, displacement and time function. (The curve contains a scale and automatically zooms in and out. The physical properties such as freezing strength, brittleness, viscosity, toughness, work, creep recovery characteristics, and stress relaxation characteristics of the sample are provided intuitively)
Technical Specifications
| Test range: 0~2000g |
| Measurement display accuracy: 0.01g |
| Measurement accuracy deviation: ≤±0.3%FSR |
| Deformation displacement range: 0~110mm |
| Displacement display accuracy: 0.001mm |
| Displacement accuracy deviation: ≤±0.1mm (corresponding measurement speed range: 0.5mm/s~1mm/s) |
| Measuring speed: 0.1mm/s~10mm/s |
| Speed resolution: 0.1mm/s |
| Speed accuracy deviation: ≤±1% of setting accuracy |
| Trigger point setting: 0.1g~500g |
| Output: RS232 serial printing interface |
| USB serial port, can realize massive data access, support historical measurement data audit trail |
| Size: length 330mm width 290mm height 530mm |
| Weight: 14.3Kg |
| Power supply voltage: 220V; frequency: 50HZ; |
| Environmental conditions: 0ºC~40ºC, relative humidity 20%~80%, indoor air environment without condensing water. |
Applicable tests
Bloom-freezing strength test:
Simultaneous real-time display of freezing strength and deformation displacement changes
|
Real-time measurement characteristic curve of load force, displacement and time function
|
The measured value of peak freezing intensity Bloomg
|
Peak deformation mm
|
The final value of freezing intensity measurement value Bloomg
|
Work (toughness) (mj)
|
Number of measurements
|
Average value of peak freezing intensity measurement Bloom g
|
Cumulative standard deviation
|
Normal-single compression test:
Real-time display of load force and deformation and displacement changes in real time
|
Real-time measurement characteristic curve of load force, displacement and time function
|
Real-time load force
|
Brittleness
|
Hardness
|
Resilience
|
Adhesion
|
Negative load force
|
Hold Time-compression hold test:
Real-time display of load force and deformation and displacement changes in real time
|
Real-time measurement characteristic curve of load force, displacement and time function
|
Trigger setting distance
|
Continuous setting time
|
Peak load
|
Peak deformation
|
Final value load
|
Real time
|
Cycle Count-Multiple compression test:
Real-time display of load force and deformation and displacement changes in real time
|
| Real-time measurement characteristic curve of load force, displacement and time function |
Real-time large value
|
Real-time small value
|
Real-time average
|
The last peak
|
Real-time standard deviation
|
Remaining times
|
Carrageenan gel strength test (optional)
Provision: real-time dynamic measurement curve, peak value, final value, deformation, work, cumulative average, cumulative standard deviation
Condensation intensity measurement accuracy verification measurement: The system provides 5 continuous standard sample detection, automatically measures the actual measurement error, and directly determines the qualified or out of tolerance. The verification measurement results are printed in real time, and the measurement process and results are stored synchronously by USB.
Deformation displacement accuracy accuracy verification measurement: The system supports 1~10mm displacement accuracy detection, automatic displacement error measurement, and direct judgment of qualified or out-of-tolerance. The verification measurement results are printed in real time, and the measurement process and results are stored synchronously by USB.
Below five parameters can be setup according to different test modes
Trigger point: 1g~500g, resolution 0.1g
|
Deformation: 0~90mm, resolution 0.1mm
|
Speed: 0.1mm/s~10mm/s, resolution 0.1mm/s
|
Holding time: 1-9999s
|
Multiple compression times: 1-200
|
Verifications procedures
1. Condensation strength
2. Deformation displacement
3. The verification measurement results are printed in real time, and the files are stored via USB.
Standard configurations
| Cylinder probe |
diameter 12.7+0.01mm |
| HW-3A precision constant temperature cold water tank |
(temperature range 3C-70C, accuracy+0.1C) (food grade thickened stainless steel inner liner) 1 set |
ZL-3 refrigerator
|
(capable of working continuously for more than 72 hours, 20C~10C12min) 1 set (stainless steel evaporator) |
| Freezing bottle |
(capacity=150ml, inner diameter=59mm, height=85mm) 16 sets |
| Disk retractable pedestal |
1set |
Measure performance contrast
| MODEL |
Measure range |
Accuracy |
| GS-2C |
0~1000g |
0.1g |
| GS-3C |
0~2000g |
0.1g |
| GS-3PRO |
0~2000g |
0.01g |
| GS-4U |
0~2000g |
0.01g |
| GS-4PRO |
0~2000g |
0.001g |
Detailed Photos
Company Profile
Who we are
We are professional manufacturer & supplier specialized in Civil Engineering & Material testing equipments since 2003. We can supply various kinds of testing equipments that complies to the following standards ASTM/AASHTO, ISO, EN, DIN JIS, as well as other specialized industry standards. Meanwhile we are authorized oversea market distributer of some famous China testing equipments manufacturer. Our customers come from 6 Continents with more than 90 countries & area since company has been established.
Our advantages
1. Quality assurance--We aim to long term cooperation with every of our customer
2. Reasonable price -- we believe only reasonable price can guarantee reliable quality & service
3. Wide range products--we not only sale own products but also acting products of mulity famous China manufacturers, time saving, easier process, better quality & price, guaranteed service.
4. After-sales service guaranteed--all sold products enjoy 12 months warranty period since products claimed, free spare parts (the transportation cost payment depends on the weight & destination).
5. Fast response & professionalism-- 7/24 response either on sales inquiry or after-sales service, Monday to Friday response within 2 hours, weekend response within 6hours.
6. Multi payment modes--Wire transfer (T/T), Paypal (credit card), Western Union, L/C.
- CONSTRUCTION MATERIAL TEST EQUIPMENT
- SERVE REAL INSTRUMENTS INTRODUCTION
){kind=link}