After-sales Service: | Life Time |
---|---|
Warranty: | 12 Months |
Material Made: | ABS Plastic |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Advantages of plastic moulds
Much lighter in weight compared to the iron mould, lower the working strength, lower in transportation cost
No need mould install and mould removal because it's a whole, can use air pump to demould, higher in work efficiency
Higher in size accuracy
No temperature deformation within -30~+100 degree C.
Technical specification
Internal Size: 150×150×150mm
Working temperature: -35-100 degree C
Internal surface Roughness: Ra<3.2um
Internal size accuracy: 150±0.3mm
Angle accuracy: <0.2degree
Flatness: <0.04mm per 100mm
Adjacent plane verticality: <0.5mm per 100mm
Structure: unibody
Material: Engineering plastic with heat expansion coefficient <50*10-6/ºC
Test Moulds specifications (plastic & iron)
Mould |
Form type |
L(mm) |
W(mm) |
D(mm) |
Cement mortar mould |
3-gang |
160±0.8 |
39.98±0.08 |
40.05±0.05 |
Cement mortar abrasive mould |
Single gang |
150±0.05 |
150±0.05 |
30±0.05 |
Mortar mould |
3-gang |
70.7±0.05 |
70.7±0.05 |
70.7±0.05 |
Concrete compression mould |
Single |
100±0.2 |
100±0.2 |
100±0.2 |
Single |
150±0.3 |
150±0.3 |
150±0.3 |
|
Single |
200±0.4 |
200±0.4 |
200±0.4 |
|
Concrete bending test mould |
Single |
400±0.8 |
100±0.2 |
100±0.2 |
Single |
550±1.0 |
150±0.3 |
150±0.3 |
|
Single |
600±1.0 |
150±0.3 |
150±0.3 |
|
Concrete split tension mould |
Single |
100±0.2 |
100±0.2 |
100±0.2 |
Single |
150±0.3 |
150±0.3 |
150±0.3 |
|
Concrete axial compression mould |
Single |
300±0.6 |
100±0.2 |
100±0.2 |
Single |
300±0.6 |
150±0.3 |
150±0.3 |
|
Single |
300±0.6 |
200±0.4 |
200±0.4 |
|
Concrete axial tension mould |
Single |
550±1.0 |
100±0.2 |
100±0.2 |
Concrete compression & elastic modulus mould |
Single |
300±0.6 |
100±0.2 |
100±0.2 |
Single |
300±0.6 |
150±0.3 |
150±0.3 |
|
Single |
300±0.6 |
200±0.4 |
200±0.4 |
|
Concrete bending elastic modulus mould |
Single |
550±1.0 |
150±0.3 |
150±0.3 |
Concrete abrasive mould |
Single |
150±0.3 |
150±0.3 |
150±0.3 |
Mould |
Upper internal diameter |
Lower internal diameter |
Height |
Concrete impervious mould |
175±0.35 |
185±0.37 |
150±0.30 |
150±0.3 |
150±0.3 |
150±0.3 |
Mould |
Internal surface flatness(per 100mm) |
Two adjacent plane verticality (per 100mm) |
Two opposite plane parallelism (per 100mm) |
Cement mortar mould |
0.03 |
0.20 |
-- |
Cement mortar abrasive mould |
0.03 |
-- |
0.02 |
Cement mortar mould |
0.04 |
0.50 |
0.05 |
Concrete compression, concrete axial compression mould, concrete compression elastic modulus mould |
0.04 |
0.50 |
-- |
Concrete bending test mould, concrete bending elastic modulus mould |
-- |
0.50 |
Suppliers with verified business licenses