| Customization: | Available |
|---|---|
| After-sales Service: | Life Time |
| Warranty: | 12 Months Free |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This testing machine is used to determine the brittleness temperature of non-hard plastics by Cantilever hammer impact test method. It can determine the impact embrittlement temperature and impact embrittlement threshold temperature when the damage degree reaches 50%.
| Volume & Weight | |
|
18×57×15 cm |
|
75×90×145 cm |
|
180kg |
|
|
|
The ambient temperature is +25ºC, and the relative humidity is ≤85%. |
|
GB/T 15256-2014 Determination of low temperature brittleness of vulcanized rubber (multi-sample method) ASTM D2137-2010 Flexible polymer and its coating fabric embrittlement point test method GB/T5470-2008 Determination of Embrittlement Temperature of Plastic Impact Method ASTM D746-2007 Test Method for Determining the Embrittlement Temperature of Plastics and Elastic Materials by Impact Method GB/T 12584-2008 Rubber or plastic coated fabric Low temperature impact test JIS K7216-1980 Test method for low temperature embrittlement of plastics JIS K6261-2006 Vulcanized or thermoplastic rubber--Determination of low temperature characteristics ISO 812-2006 Vulcanized rubber or thermoplastic rubber--Determination of low-temperature brittleness ISO 974-2000 Plastics. Determination of brittleness temperature by impact method |
|
RTºC~-76ºC(Room temp. 25ºC) |
|
≤±0.5ºC |
|
≤±2.0ºC |
|
RT→-76ºC ≤80min (average in full scale)-- Mechanical refrigeration |
|
1.6mm±0.1mm |
|
1.4-2.4m/sec(adjustable)digital display 0.0m/sec 200±20cm/s speed unchanged within 6mm range after impact |
|
A type 15pcs*4 groups, B type 4groups*5pcs |
|
Sample A: L20±0.25mm* W2.5±0.05mm*T2.0±0.1mm Sample B: L31.75±6.35mm W6.35±0.51mm T1.91±0.13mm |
|
A Clamp 3.6mm±0.1mm B Clamp 6.4±0.3 mm |
|
A clamp 2.0mm±0.1mm B clamp 8.0±0.3mm |
|
4.0mm±0.1mm(A Clamp) |
|
5+0.5/-0 min or 3min+0.5/-0 min |
|
1.5kw |
|
|
|
The ground is level and well ventilated No strong vibration around the equipment no strong electromagnetic field around the equipment No flammable, explosive, corrosive substances and dust around the equipment There is a drainage floor drain near the equipment Ground load-bearing capacity of the site: not less than 800kg/m2 Leave proper use and maintenance space around the equipment. |
|
Temp.:15ºC~35ºC Relative humidity:≤85% Air pressure:86kPa~106kPa |
|
AC380V three-phase four-wire + protective ground wire Allowable voltage fluctuation range: AC (380±38) V Allowable frequency fluctuation range: (50±0.5) Hz The grounding resistance of the protective earth wire is less than 4Ω; TN-S power supply or TT power supply The user is required to configure an air or power switch with the corresponding capacity for the equipment at the installation site, and this switch must be independent for the use of the equipment Total power: 5kW Maximum current 20A |
){kind=link}