| Customization: | Available |
|---|---|
| After-sales Service: | Life Time |
| Warranty: | 12 Months Free |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This Is a specialized testing equipment for fatigue life testing and static testing of components designed and manufactured strictly in accordance with national standards. It is widely used for fatigue performance testing of various metal and non-metal material samples, such as dental implants, bone plates, bone screws, polymer elastic materials, composite materials, carbon fibers, electrical components, etc. It is matched with a static testing system and can perform static testing. The entire cycle testing process of the samples is automatically completed by microcomputer control, and test reports can be printed. Users can adjust the testing program according to their actual needs during use, which is extremely convenient to operate. It can replace imported products of the same type and is the preferred choice for manufacturers and users in colleges, medical devices, scientific research institutions, mechanical manufacturing, aerospace, quality inspection institutions, and other fields.
Features & Functions
1. Floor standing door type mobile loading platform:
Two column door design, automatic lifting of the upper crossbeam cross structure, manual locking adjustment, four shock-absorbing foot cups installed at the lower end, large diameter column structure frame, high strength.
2. Customized servo linear actuator and driving device (single channel):
The effective stroke of the actuator is 100mm, equipped with high-precision magnetostrictive displacement sensors, and a buffer zone is designed at the limit position of the actuator amplitude to avoid damage caused by running out of control.
3. Data acquisition and control system:
Composed of a single channel fully digital dynamic and static servo controller, computer and software, as well as accessories, etc.
4. Celtron imported load sensors from the United States
Using imported load sensors from Celtron, USA, with an overload capacity of 150%. Place it at the front end of the actuator or on the workbench, and calibrate the sensor before leaving the factory.
5. Measurement display system:
The machine uses an external displacement sensor to collect the deformation of the sample, and the LCD screen displays information such as the force value, displacement, frequency, number of tests, peak and valley values of the sample.
6. Breaking judgment:
There are two conditions. Firstly, when the current force value reaches X% of the full range, it enters the judgment range. Secondly, when the descending force value is greater than the peak value * X%.
7. System unit:
The load units of the entire measurement and control system can be switched freely without the need for recalibration. Currently, the supported units include N, kN, lbf, GF, and kgf. After switching the system units, the standard units will be switched synchronously.
8. Test data recording frequency (Hz):
The frequency of software collection of experimental data. Up to 10000Hz, which means collecting 10000 valid data points in one second. Please choose the frequency of data saving according to the experimental needs. The higher the setting, the larger the saved file, and the higher the requirements for the computer.
9. Modulus test:
After selection, the stress-strain curve for each cycle will be displayed during dynamic testing.
10. External controller:
The calibration parameters are stored in the controller, and reinstalling the software does not affect the parameters.
11. The software meets 24 bit AD.
12. Adaptive PID to meet the testing needs of different rigid specimens.
| 1. Maximum test force: | ± 1000N |
| 2. Test force resolution: | 0.01N |
| 3. Cycle times: | 107 to 108 |
| 4. Accurate measurement range of force value: | 2% FS-100% FS |
| 5. Static test force accuracy | ± 0.5% FS |
| 6. Space inside the test bench (length, width, height): | 400mm * 400mm * 500mm (space without installing tooling and accessories) |
| 7. Displacement resolution: | 0.001mm |
| 8. Relative error of displacement measurement indication: | ± 0.5% |
| 9. Amplitude stroke: | ± 50mm (maximum stroke 100mm) |
| 10. Fatigue frequency: | 0.1-15Hz (adjustable, according to the principle of amplitude frequency characteristics, in general, the frequency will decrease when the deformation is large) |
| 11. Sampling frequency: | Supports real-time collection of 10kHz |
| 12. Test waveforms: | sine wave, triangular wave, square wave, sawtooth wave, cosine wave, and other waveforms |
| 13. Display: | Computer screen display |
| 14. Machine size: | Approximately (L430 * W400 * H1300mm) |
| 15. Net Weight: | Approximately 300kg |
| 16. Power supply: | AC220V/380V |
){kind=link}